Stable horizontal structure
Vertical base design with symmetrical arrangement of motor and bowl maintains stable operation and reduces vibration. JG type rubber vibration isolator requires no anchor bolts.
A horizontal screw discharge settling centrifuge for continuous solid-liquid separation. Featuring labyrinth seals at both bowl ends, it is designed for two-phase and three-phase separation in wastewater, chemical, mining, and food industries. Available in multiple bowl sizes with high separation efficiency.
For model selection, send your material, capacity, solids content and target separation result.
Separation takes place in a horizontal bowl equipped with a scroll conveyor. The process material is fed into the bowl through a stationary inlet tube and is smoothly accelerated in the accelerate chamber. Centrifugal forces cause instant sedimentation of the solids on the wall of the bowl. The conveyor rotates in the same direction as the bowl, but at a different speed, thus moving the solids towards the conical end of the bowl. In the LW conventional type, labyrinth seals are used at both bowl ends. The separated solid phase is conveyed to the solid discharge port by the scroll and discharged under centrifugal force, while the liquid phase drains out under gravity and centrifugal force through the overflow plate. This series offers easy operation, continuous and stable running, and a wide application scope.
LW series decanter centrifuges are used in industrial centrifugal separators for wastewater treatment, sludge dewatering, chemical processing, mining slurry separation, and food processing. Suitable for two-phase (solid-liquid) separation across various industries.
Municipal and industrial wastewater treatment. Continuous 24/7 operation with high separation efficiency. Labyrinth seals ensure reliable performance in damp environments.
Mineral slurry dewatering and tailings treatment. Up to 3,100 G-force for high-capacity dewatering. Applications should define solids content and wear-protection requirements before quotation.
Solid-liquid separation in chemical and food production. Corrosion-resistant stainless steel or duplex steel for extended service life.
Vertical base design with symmetrical arrangement of motor and bowl maintains stable operation and reduces vibration. JG type rubber vibration isolator requires no anchor bolts.
Main bowl and conveyor components are made of centrifugal cast corrosion-resistant stainless steel or duplex steel, ensuring high maximum bowl speed and high centrifugal force.
Dual-motor drive makes bowl speed and conveyor speed adjustable independently. Optional planetary gearbox and hydraulic gearbox offer a wide range of differential speed adjustment.
Labyrinth seals are used at both bowl ends for the LW conventional type, ensuring continuous and stable running while preventing leakage.
Bowl speed and differential speed detection, over-vibration protection, motor overload and overheat protection, bearing temperature monitoring, conveyor torque protection, and gas-tight explosion-proof protection.
Continuous feeding and continuous discharge. Material is smoothly accelerated and separated without stopping, ensuring high processing capacity.
The process material is fed into the horizontal bowl through a stationary inlet tube and smoothly accelerated in the accelerate chamber.

Centrifugal forces cause instant sedimentation of the solids on the inner wall of the bowl.

The scroll conveyor rotates in the same direction at a different speed, moving the solids towards the conical end of the bowl.

Solids are discharged from the solid discharge port under centrifugal force. Clarified liquid drains out under gravity and centrifugal force through the overflow plate.


| Models | Bowl Diameter | L/D Ratio | Bowl Speed | G-force | Main Motor Power | Weight | Dimension (L*W*H) |
| LW220*880 | 220 | 4 | 4800 | 2840 | 7.5-11 | 1000 | 2650*750*750 |
| LW335*1460 | 350 | 4.17 | 4000 | 3100 | 22 | 2020 | 3550*1000*1050 |
| LW450*1800 | 450 | 4 | 3200 | 2577 | 30-37 | 3500 | 4100*10509*1250 |
| LW450*2025 | 450 | 4.5 | 3200 | 2577 | 30-37 | 3800 | 4550*1050*1250 |
| LW530*2120 | 530 | 4 | 2800 | 2327 | 45-55 | 4200 | 4750*1250*1450 |
| LW530*2650 | 530 | 5 | 2500 | 2150 | 37-55 | 4500 | 5050*1450*1750 |
| LW630*2300 | 630 | 3.65 | 2500 | 2205 | 75 | 8000 | 5350*1700*1550 |
| LW650*2800 | 650 | 4.3 | 2500 | 2270 | 90 | 9600 | 5350*1700*1550 |
| LW1000*3000 | 1000 | 3 | 1500 | 1258 | 132 | 16000 | 5150*2500*1950 |
Key wear areas can be reinforced to extend service intervals and simplify replacement of high-wear components.
Scroll with welded hard facing or spray coating. Provides a hard, wear-resistant surface for the continuous conveying of abrasive solids.
Scroll inlaid with tungsten carbide tiles. Replaceable hard alloy blocks provide excellent protection in highly abrasive zones.
Bowl inner wall welding with high-strength wear-resistant strips. Protects the bowl surface from the friction of the sediment layer.
Solid discharge port uses tungsten carbide or ceramic bushings. Replaceable tungsten carbide tiles HRA89-90 ensure a simple structure, easy replacement, and low maintenance cost.
Product performance depends on machining accuracy, rotating part quality, welding, assembly, control integration and final testing. Manufacturing capability therefore focuses on the core processes that directly influence centrifuge stability, service life and operating reliability.
Instead of asking only for a machine price, send the basic process data. It helps engineering select a suitable bowl size, motor power, wear protection and control configuration.