Continuous feeding, filtration and discharge
Feeding, filtration, washing, dewatering and conveying are completed continuously. Low energy consumption, stable performance and good separation with high efficiency and automation.
A continuous horizontal screen worm centrifuge for solid-liquid separation of crystalline and granular materials. Feeding, filtration, washing, dewatering and discharging are completed continuously. Large processing capacity with low cake moisture content, suitable for salt, chemical, food and mining industries.
For model selection, send your material, capacity, solids content and target separation result.
The LWL horizontal screen worm centrifuge is a continuous filter centrifuge for solid-liquid separation. The feed suspension enters the conveyor chamber and is jetted into the basket near the cone point; under centrifugal force the liquid is filtered through the screen on the basket wall while solids are retained and conveyed from the small end to the large end. As the rotating diameter increases, the centrifugal force increases rapidly, reducing the solid moisture from initial high content to minimum at discharge, realizing automatic and continuous solid-liquid separation. Feeding, dewatering, washing and discharging are continuous with high efficiency and automation.
LWL centrifuges are widely used in chemical, food, salt, mining and pharmaceutical industries. Due to the separation principle and structural characteristics, they are mainly suitable for materials with relatively large particle size and no strict requirement on particle breakage. Material analysis and corresponding tests should be carried out to determine applicability and separation performance before selection.
Suitable for crystalline salt, sodium sulfate, ammonium chloride, ammonium sulfate, copper sulfate and other crystalline products. LWL screen worm centrifuge has become the preferred model for salt chemical production lines due to continuous operation and low cake moisture (1.5%–5%).
Suitable for mineral sand, coal powder, plastic pellets and other granular materials with particle size above 0.1 mm. Large processing capacity up to 50 m³/h for LWL1000 model.
Suitable for crystalline sugar, food additives and pharmaceutical intermediates where large particle size and low breakage requirement apply. Built-in washing pipe allows effective thin-cake washing with low washing liquid consumption.
Feeding, filtration, washing, dewatering and conveying are completed continuously. Low energy consumption, stable performance and good separation with high efficiency and automation.
Main parts such as bowl and conveyor are made of high-quality corrosion-resistant stainless steel and titanium alloy. Independent lubrication system with reliable lubrication and good cooling effect.
Basket angle 10° or 20° available depending on process conditions. Special filter metal plate-net (0.4–0.5 mm) or trapezoid wire forming mesh (4.5–5 mm) optional. Filter mesh thickness up to 2.5 mm for longer service life.
Built-in washing pipe allows washing during filtration. Thin-cake washing is effective with low washing liquid consumption. Steam pipe may be provided on the back of the basket for high-temperature washing of crystallized materials.
Variable-frequency control with stepless basket speed regulation. Speed detection, over-vibration protection, motor overload/overheat protection available.
Cycloidal, planetary and hydraulic gearboxes available for different materials. For high-viscosity materials, hydraulic gearbox can be selected for stable and reliable operation.
The feed suspension enters the conveyor chamber and is jetted into the basket near the cone point through the feed nozzle at the small end.

Under centrifugal force, the liquid phase passes through the screen on the basket wall while solid particles are retained inside the basket.

Solids are conveyed from the small end to the large end by the differential speed between bowl and conveyor. As the rotating diameter increases, centrifugal force increases rapidly, reducing solid moisture from initial high content to minimum at discharge.

Dewatered solids are continuously discharged from the large end. Feeding, filtration, washing and discharging are completed continuously without stopping.


| Items | LWL320 | LWL350 | LWL450 | LWL530 | LWL630 | LWL800 | LWL1000 |
| Basket Dia(mm) | 320 | 350 | 450 | 530 | 630 | 800 | 1000 |
| Max rolating speed(r/min) | 2630 | 3000 | 2500 | 2000 | 1800 | 1400 | 900 |
| Centrifuge force | 1240 | 1770 | 1580 | 1190 | 1140 | 870 | 445 |
| Productivity(m³/h) | 0.5-3 | 1-5 | 2-8 | 3-10 | 5-15 | 8-20 | 10-50 |
| Main Motor Power(kw) | 7.5 | 11 | 22 | 30 | 37 | 55 | 75 |
| Weight(kg) | 700 | 1200 | 1700 | 2500 | 3500 | 4000 | 6200 |
| Dimension (L*W*H)(mm) | 1350*1050*1000 | 1550*1150*1050 | 1650*1350*1200 | 1650*1400*1350 | 2100*1550*1650 | 2300*1550*1750 | 3200*2150*2250 |
Key wear areas can be reinforced to extend service intervals and simplify replacement of high-wear components. The LWL series uses special wear-resistant materials in vulnerable parts to significantly extend service life.
Conveyor can be spray-coated with wear-resistant alloy or welded with hard alloy inserts. Tungsten carbide alloy spraying on the pushing surface provides excellent wear resistance, impact resistance and spalling resistance. For high-abrasion applications, hard alloy inserts or tungsten carbide alloy mosaic structure can be specified.
Special filter metal plate-net (0.4–0.5 mm) or trapezoid wire forming mesh (4.5–5 mm) optional. Filter mesh thickness up to 2.5 mm for longer service life. Trapezoid slot mesh offers low filtration resistance, easy backwashing, anti-clogging and good wear resistance. Screen mesh material selectable based on material abrasiveness.
Bowl and conveyor main parts are made of high-quality corrosion-resistant stainless steel and titanium alloy. Material options include 304, 316L, duplex steel or titanium alloy depending on medium corrosiveness. Bowl cone angle selectable at 10° or 20° to suit different wear and separation requirements.
Discharge port equipped with ceramic or hard alloy nesting to resist wear from continuous solids discharge. Integrated inverted cone ring design at conical bowl front end provides both filtration and sedimentation dewatering while protecting the discharge zone.
Product performance depends on machining accuracy, rotating part quality, welding, assembly, control integration and final testing. Manufacturing capability therefore focuses on the core processes that directly influence centrifuge stability, service life and operating reliability.
LWL is a screen worm (filtration) centrifuge: the bowl wall has filter holes lined with screen mesh. Liquid passes through the screen under centrifugal force while solids are retained and conveyed by the screw conveyor. LW is a solid bowl (sedimentation) centrifuge: the bowl wall is solid, and separation relies on density difference. LWL is suitable for coarse particles, high solids concentration and washing requirements; LW is suitable for fine particles, low solids concentration and sludge dewatering.
LWL is suitable for suspensions with solid particle size of 0.05–3 mm and solids concentration of 10%–75%. Material analysis and tests are recommended before selection to confirm applicability and separation performance.
Chemical, food, salt, mining and pharmaceutical industries. Typical applications include crystalline salt, sodium sulfate, ammonium chloride, mineral sand, coal powder, plastic pellets, crystalline sugar and pharmaceutical intermediates.
LWL achieves cake moisture of 1.5%–5% for salt chemical production, significantly lower than sedimentation-type centrifuges. For sodium chloride, moisture content can reach below 1%; for anhydrous sodium sulfate, below 2.1%.
Conveyor can be spray-coated with wear-resistant alloy or welded with hard alloy inserts. Tungsten carbide alloy spraying on pushing surface provides excellent wear resistance. Filter mesh thickness up to 2.5 mm for longer service life. Discharge port equipped with ceramic or hard alloy nesting.
Cycloidal, planetary and hydraulic gearboxes available for different materials. For high-viscosity materials, hydraulic gearbox can be selected. Hydraulic differential system offers output torque 2–3 times greater than mechanical types, with differential speed steplessly adjustable in 1–20 r/min range.
Instead of asking only for a machine price, send the basic process data. It helps engineering select a suitable bowl size, motor power, wear protection and control configuration.