Combined sedimentation and filtration
Cantilever-type combination centrifuge integrating solid bowl decanter and screen worm centrifuge working principles. Two-stage solid-liquid separation for optimal dewatering results.
A cantilever-type combination centrifuge that integrates solid bowl decanter and screen worm centrifuge principles in a two-stage solid-liquid separation process. Large processing capacity with low moisture content in the separated solids, especially suitable for mother liquor with low solid concentration or containing oily/colloidal substances.
For model selection, send your material, capacity, solids content and target separation result.
The LWLZ horizontal concentration filter centrifuge is a cantilever-type combination centrifuge that integrates the working principles and characteristics of a solid bowl decanter centrifuge and a screen worm centrifuge across two different separation stages to achieve optimal separation results. In the first solid-liquid separation stage, the material is dewatered in the bowl sedimentation zone, and the concentrated solids are pushed to the filtration zone, while the clarified liquid is discharged through the overflow port. In the second solid-liquid separation stage, the concentrated material is further dewatered in the screen bowl, further reducing the moisture content of the solid phase.
LWLZ centrifuges are particularly applicable to solid-liquid separation in chemical and pharmaceutical industries, featuring large processing capacity and low solid moisture content, with better effect on mother liquor with low solid concentration or containing small amounts of oily or colloidal substances. Widely used in industries such as chemical, food, salt, mining and pharmaceutical.
Suitable for separation of materials such as oxalic acid, ethylenediamine, p-nitroaniline, trichloroisocyanuric acid, polyvinyl chloride, ammonium phosphate, ammonium sulfate, copper sulfate, fumaric acid, sodium carbonate, sodium sulfate, oxalic acid, mirabilite, citric acid and AH-salt.
Suitable for crystalline soda, sodium thiosulfate, high-grade soda, lactose, vegetable processing and plastic pellet separation. LWLZ centrifuge is based on LWL screen centrifuge with an added sedimentation pre-concentration stage, achieving lower salt moisture content than LWL alone.
Applied in pharmaceutical, food chemical, dye chemical and environmental desulfurization industries. Widely used in single-effect evaporator, multi-effect evaporator, MVR, wastewater treatment, waste salt treatment and flue gas desulfurization solutions.
Cantilever-type combination centrifuge integrating solid bowl decanter and screen worm centrifuge working principles. Two-stage solid-liquid separation for optimal dewatering results.
Stage 1: material dewatered in bowl sedimentation zone; concentrated solids pushed to filtration zone; clarified liquid discharged through overflow port. Stage 2: concentrated material further dewatered in screen bowl, further reducing solid moisture content.
Large processing capacity and low moisture content of separated solids. Suitable for continuous production. Bowl cone angle selectable at 20° or 40° depending on working conditions.
Especially suitable for mother liquor with low solid concentration or containing small amounts of oily or colloidal substances. Screen mesh options include metal plate mesh or wedge wire mesh.
Variable-frequency control with stepless bowl speed adjustment. Bowl and conveyor rotate at differential speeds with continuous solid discharge.
Cantilever-type design with simple and compact construction for convenient maintenance and operation.
Material enters the rotating bowl through the feed pipe.

In the bowl sedimentation zone, solids settle under centrifugal force and are pre-concentrated; clarified liquid is discharged through the overflow port.

The pre-concentrated solids are pushed by the screw conveyor into the cylindrical screen section, where additional dewatering is achieved.

Dewatered solids are continuously discharged from the screen section; the two-stage process further reduces the moisture content of the solid phase.


| Models | Bowl Diameter | Bowl Speed | G-force | Productivity | Main Motor Power | Weight | Dimension (L*W*H) |
| LWLZ450 | 450 | 2500 | 1574 | 2-6 | 37 | 2500 | 1750*1400*1450 |
| LWLZ650 | 650 | 1600 | 931 | 3-8 | 55 | 4000 | 2600*1700*1950 |
| LWLZ900 | 900 | 1200 | 725 | 5-15 | 75 | 5000 | 2900*2150*2350 |
Key wear areas can be reinforced to extend service intervals and simplify replacement of high-wear components. The LWLZ series combines sedimentation and filtration, requiring wear protection in both the decanter and screen sections.
Cantilever-type rotating assembly with sedimentation and filtration sections. Wear protection for rotating assemblies designed for continuous two-stage separation.
Hardfacing with tungsten carbide on screw blade surfaces; ceramic tiles inserted at the most severely worn positions. Hybrid tile layout (high-grade YG15C in feed zone, standard YG11C in conveying zone, ceramic composite in beach zone) achieves approximately 85% of full-coverage performance at only 65% of the cost.
Wear-protected discharge zone at the conical end and screen section. Replaceable ceramic or tungsten carbide wear parts at the discharge port support easier replacement and lower maintenance cost.
Screen mesh available in metal plate mesh or wedge wire mesh. Bowl cone angle selectable at 20° or 40° depending on material characteristics. Cone angle selection affects both wear pattern and separation efficiency.
Product performance depends on machining accuracy, rotating part quality, welding, assembly, control integration and final testing. Manufacturing capability therefore focuses on the core processes that directly influence centrifuge stability, service life and operating reliability.
LWLZ is a cantilever-type horizontal spiral discharge concentration filter centrifuge. It integrates a solid bowl decanter and screen worm centrifuge in a two-stage solid-liquid separation process, achieving optimal dewatering results.
In the first stage, material is dewatered in the bowl sedimentation zone and concentrated solids are pushed to the filtration zone while clarified liquid is discharged. In the second stage, the concentrated material is further dewatered in the screen bowl, reducing solid moisture content to a lower level than single-stage machines.
Suitable for chemical and pharmaceutical industries, with better effect on mother liquor with low solid concentration or containing oily/colloidal substances. Widely used for oxalic acid, ethylenediamine, p-nitroaniline, trichloroisocyanuric acid, polyvinyl chloride, ammonium phosphate, ammonium sulfate, copper sulfate, fumaric acid, sodium carbonate, sodium sulfate, mirabilite, citric acid, AH-salt, crystalline soda, sodium thiosulfate, lactose and plastic pellets.
LWLZ is based on the LWL screen worm centrifuge with an added sedimentation pre-concentration stage. The sedimentation section increases solid concentration before the screen section, resulting in lower moisture content in the final cake. For example, salt moisture content can reach below 1% for sodium chloride and below 2.1% for anhydrous sodium sulfate.
Screw blade surfaces can be hardfaced with tungsten carbide; ceramic tiles can be inserted at severely worn positions. Screen mesh available in metal plate mesh or wedge wire mesh. Bowl cone angle selectable at 20° or 40°.
Variable-frequency control with stepless bowl speed adjustment. Bowl and conveyor rotate at differential speeds for continuous solid discharge.
Instead of asking only for a machine price, send the basic process data. It helps engineering select a suitable bowl size, motor power, wear protection and control configuration.