Home/Products/Decanter Centrifuge/LWX Decanter Centrifuge(Impeller Liquid Discharge)

LWX Series Decanter Centrifuge (Impeller Liquid Discharge)

A horizontal decanter centrifuge designed for solid-liquid separation with a centripetal pump for pressurized liquid discharge. The liquid is discharged under pressure, eliminating the need for a relay pump and preventing secondary contact between the liquid and solids, ensuring high cleanliness for pharmaceutical and food applications.

  • Pressurized liquid discharge via centripetal pump
  • Replaces relay pump, saves energy
  • No secondary contact between liquid and solids
  • High cleanliness for pharma and food

For model selection, send your material, capacity, solids content and target separation result.

Bowl diameter range350-530 mm
Max rotating speed3200-4000 r/min
Centrifuge force13040-3100
Main motor power22-55 kW
Product overview

Pressurized discharge for high-cleanliness separation

The LWX decanter centrifuge is used for solid-liquid separation of materials. The bowl rotates in the same direction as the spiral, but at a different speed. Materials are fed into the bowl through the feed pipe. With the centrifugal force, the solid phase materials deposit on the bowl wall and form a sediment layer; the liquid phase materials form a liquid phase ring. The spiral continuously pushes the solid phase materials on the bowl wall to the conical end of the bowl and discharges them out through the slag discharging port. The liquid phase is then discharged out through the bowl’s centripetal pump at the large end. Because the liquid is discharged through the centripetal pump with certain pressure, the mother liquid can be conveyed horizontally for a certain distance, replacing a relay pump and saving energy. The liquid and solids are discharged from different cavities, completely avoiding secondary contact between fine droplets and solids, ensuring high cleanliness.

  • Liquid discharged under pressure via centripetal pump, replacing relay pump.
  • Liquid and solids discharged from separate cavities, no secondary contact.
  • Suitable for pharmaceutical and food production with high cleanliness requirements.
  • Continuous operation with stable performance and easy maintenance.
LWX Series Decanter Centrifuge (Impeller Liquid Discharge) overview
Applications

Application scenarios

LWX centrifuges are applicable to solid-liquid separation in chemical, pharmaceutical, food, environmental protection and mining industries. Especially suitable for applications requiring high cleanliness, such as pharmaceutical and food production, where the mother liquid needs to be conveyed under pressure or secondary contamination must be avoided.

Pharmaceutical production
01

Pharmaceutical production

Suitable for antibiotic, vitamin and pharmaceutical intermediate separation. Liquid is discharged under pressure via centripetal pump, avoiding secondary contact with solids and ensuring high cleanliness. Meets GMP requirements for hygienic production.

Food processing
02

Food processing

Suitable for food additive, starch and sugar separation. Pressurized liquid discharge eliminates the need for a relay pump, simplifying the process line and reducing energy consumption.

Chemical and environmental protection
03

Chemical and environmental protection

Suitable for chemical slurry separation and industrial wastewater treatment. Continuous operation with adjustable differential speed for different material properties. Corrosion-resistant stainless steel or duplex steel construction available.

Core features

Designed for stable operation and long service life

01

Centripetal pump liquid discharge

Liquid is discharged through the centripetal pump at the large end of the bowl underpressure. This eliminates the need for a relay pump and allows the mother liquid to be conveyed horizontally for a certain distance.

02

High cleanliness with separate cavities

Liquid and solids are discharged from different cavities. This completely avoids the possibility of secondary contact between fine droplets and solids after discharge, ensuring high cleanliness suitable for pharmaceutical and food production.

03

Continuous operation with adjustable differential speed

The bowl and spiral rotate in the same direction at a differential speed. Dual-motor drive allows independent adjustment of bowl and spiral speeds, adapting to different material properties.

04

Corrosion-resistant construction

Bowl and spiral are made of corrosion-resistant stainless steel or duplex steel. Suitable for various chemical and pharmaceutical materials.

05

Wear protection for abrasive materials

Spiral blades can be spray-coated with wear-resistant alloy or inlaid with hard alloy blocks. Bowl inner wall welded with high-strength wear-resistant strips.

06

Multiple safety protections

Over-vibration protection, motor overload/overheat protection, bearing temperature monitoring, spiral torque protection and differential speed detection.

Working principle

How separation works, step by step

01

Feed enters the bowl

Material is fed into the bowl through the feed pipe. The bowl rotates at high speed, and centrifugal force is generated.

Feed enters the bowl
02

Solids settle on the bowl wall

Under centrifugal force, solid phase materials deposit on the bowl wall to form a sediment layer. The liquid phase forms a liquid ring inside.

Solids settle on the bowl wall
03

Spiral conveys solids to conical end

The spiral rotates at a differential speed relative to the bowl, continuously pushing the sediment layer to the conical end of the bowl. Solids are discharged through the slag discharging port.

Spiral conveys solids to conical end
04

Liquid discharged via centripetal pump

The clarified liquid is discharged under pressure through the centripetal pump at the large end of the bowl, rather than by gravity overflow. This allows the liquid to be conveyed to the next process step without a relay pump.

Liquid discharged via centripetal pump

KEY FEATURES

  • Pressurized liquid discharge via centripetal pump
  • Eliminates relay pump and saves energy
  • Separate cavities for liquid and solids
  • High cleanliness for pharma and food
  • Continuous operation with adjustable differential speed
  • Corrosion-resistant and wear-protected construction
LWX Series Decanter Centrifuge (Impeller Liquid Discharge) key features
Technical parameters

Technical parameters

Models Bowl Diameter L/D Ratio Bowl Speed G-force Main Motor Power Weight Dimension (L*W*H)
LWX355*1460 350 4.17 4000 3100 22 2020 3250*1000*1050
LWX420*1680 420 4 3500 3080 30-37 3500 3450*1350*1300
LWX530*2120 530 4 3200 3040 45-55 4200 4050*1650*1450
Wear Protection

Protection for abrasive solids and high-load operation

Key wear areas can be reinforced to extend service intervals and simplify replacement of high-wear components.

Spiral blade protection

Spiral blade protection

Spiral blades can be spray-coated with tungsten carbide alloy or inlaid with replaceable hard alloy blocks. This significantly extends blade life and maintains the clearance between spiral and bowl, ensuring stable separation efficiency.

Bowl inner wall protection

Bowl inner wall protection

Bowl inner wall is welded with high-strength wear-resistant strips. This protects the bowl surface from the friction of the sediment layer during continuous solids conveyance.

Solid discharge port protection

Solid discharge port protection

Solid discharge port uses tungsten carbide or ceramic bushings. Replaceable wear parts reduce maintenance cost and downtime.

Centripetal pump protection

Centripetal pump protection

The centripetal pump is precision-machined from corrosion-resistant materials. The impeller and wear ring are designed for long-term reliable operation under pressurized discharge conditions.

Manufacturing capability

Built around real centrifuge manufacturing and assembly

Product performance depends on machining accuracy, rotating part quality, welding, assembly, control integration and final testing. Manufacturing capability therefore focuses on the core processes that directly influence centrifuge stability, service life and operating reliability.

Rotating assemblies
Machining and assembly of bowl and spiral components. Precision dynamic balancing ensures stable operation at high speeds. The centripetal pump is precision-machined to ensure reliable pressurized discharge.
Control integration
Dual-motor drive with independent control of bowl and spiral speeds. Differential speed adjustable to suit different material properties. Over-vibration, temperature and torque protection integrated into the control system.
Wear protection
Spiral blades with hard alloy spray coating or inlaid wear blocks. Bowl inner wall with wear-resistant strips. Solid discharge port with replaceable wear bushings.
Qualification support
Factory and enterprise qualification materials available. Design and manufacturing follow GMP requirements for pharmaceutical and food applications.
FAQ

Frequently asked questions

Q1:   What is the difference between LWX and LW?

LW is the conventional type, where clarified liquid drains by gravity and centrifugal force through the overflow plate. LWX uses a centripetal pump (impeller) to discharge the liquid under pressure, allowing the mother liquid to be conveyed without a relay pump and preventing secondary contact between liquid and solids.

Q2:  What is the advantage of the centripetal pump discharge?

The liquid is discharged under pressure, so it can be conveyed horizontally for a certain distance, replacing a relay pump and saving energy. Because liquid and solids are discharged from different cavities, secondary contact between fine droplets and solids is completely avoided, ensuring high cleanliness.

Q3: What materials can be processed?

Suitable for solid-liquid separation in chemical, pharmaceutical, food, environmental protection and mining industries. Especially suitable for pharmaceutical and food production where high cleanliness is required.

Q4: What wear protection is available?

Spiral blades can be spray-coated with tungsten carbide or inlaid with replaceable hard alloy blocks. Bowl inner wall is welded with wear-resistant strips. Solid discharge port uses tungsten carbide or ceramic bushings.

Q5:  What is the recommended maintenance schedule?

Daily: check bearing temperature, vibration and centripetal pump pressure. Regular inspection of spiral wear blocks, bowl wear strips and discharge port bushings. Replace worn parts as needed. Check differential speed and torque values.

Send inquiry

Get a model recommendation for your material

Instead of asking only for a machine price, send the basic process data. It helps engineering select a suitable bowl size, motor power, wear protection and control configuration.

1. Material / slurry name and industry
2. Required processing capacity
3. Solids content and particle size
4. Target: clarified liquid, dry solids, or phase separation

Your inquiry should be reviewed by a technical sales or engineering team before quotation.

Send Inquiry
Overview Get a Quote