Home/Products/Disc Stack Centrifuge

Disc Stack Centrifuge

A high-speed vertical centrifuge using a stack of closely spaced conical discs to separate fine particles and immiscible liquids. Achieves separation forces up to 14,000 G with continuous or intermittent solids discharge. Ideal for clarification and purification duties where fine particle removal and high throughput are required.

  • Up to 14,000 G separation force
  • Handles particles as fine as 3–30 μm
  • Continuous or self-cleaning discharge
  • Compact footprint, high throughput

For model selection, send your material, capacity, solids content and target separation result.

Bowl diameter range230-500 mm
Max rotating speed5900-10000 r/min
Separation factor7,800–14,000
Motor powerr1.5-22 kW
Throughput0.5–10 m³/h
Product overview

Fine separation through stacked disc technology

A disc stack centrifuge separates suspended solids and immiscible liquids using a bowl containing a stack of closely spaced conical discs rotating at high speed. Feed enters the center of the bowl and is distributed into the narrow channels between discs. Under centrifugal force, denser particles migrate outward and settle on the underside of the discs, sliding down to collect at the bowl wall. Lighter liquid phases move inward and exit through separate outlets. The disc geometry reduces the settling distance from the full bowl depth to just the gap between discs—typically 0.4 to 2 mm—dramatically accelerating separation and enabling the capture of fine particles that would not settle in a gravity clarifier. The result is high separation efficiency in a compact footprint.

  • Stacked conical discs multiply the effective settling area within a compact bowl.
  • Handles particle sizes down to 3–30 μm with centrifugal force 4,000–14,000 times gravity.
  • Suitable for two-phase (solid-liquid) and three-phase (solid-liquid-liquid) separation.
  • Continuous flow design with self-cleaning or nozzle discharge options available.
Disc Stack Centrifuge overview
Applications

Application scenarios

Disc stack centrifuges are used across industries where fine clarification, purification, or three-phase separation is required. Typical applications include edible oil clarification, yeast recovery in brewing, pharmaceutical suspension purification, marine fuel oil purification, biodiesel production, and latex concentration.

Food and beverage processing
01

Food and beverage processing

Clarification of vegetable oils, juice, beer, and wine. Yeast recovery in brewing at flow rates around 5–6 hL/hr. Removes fine haze-forming particles to achieve product clarity.

Pharmaceutical and biotech
02

Pharmaceutical and biotech

Purification of fermentation broths, vaccine extraction, insulin and antibiotic processing. Hermetic feed designs reduce shear-induced cell lysis by 30–50% for sensitive biologics.

Chemical and marine fuel
03

Chemical and marine fuel

Purification of lube and fuel oils to remove water and particulates. Recovery of catalysts, solvents, and fine chemicals. Three-phase separation for oil-water-solid mixtures.

Core features

Designed for stable operation and long service life

01

Stacked disc geometry

Closely spaced conical discs (0.4–3 mm gap) multiply the settling area and reduce particle settling distance to a fraction of a millimeter. This enables separation of fine particles and droplets that gravity clarification cannot capture.

02

High separation factor

Bowl speeds up to 10,000 r/min generate separation forces of 7,800–14,000 G. This acceleration dramatically reduces separation time compared to sedimentation or flotation.

03

Flexible discharge modes

Options include manual discharge (batch operation), self-cleaning bowl with intermittent solids ejection, and nozzle discharge for continuous solids removal. Selection depends on solids load and process continuity requirements.

04

Two-phase and three-phase capability

Configurable for solid-liquid clarification or solid-liquid-liquid separation. The interface between light and heavy liquid phases is adjusted via gravity disc diameter and bowl speed to suit different feed compositions.

05

Corrosion-resistant construction

Wetted parts available in SS304, SS316L, or duplex 2205 stainless steel. PTFE/graphite seals for product contact. Explosion-proof, gas-tight, and nitrogen blanketing options available for hazardous environments.

06

Compact footprint with high throughput

Disc stack geometry achieves high separation capacity in a vertical bowl design. Skid-mounted systems with integrated controls are available for plug-and-play installation.

Working principle

How separation works, step by step

01

Feed enters the bowl center

Feed slurry or emulsion is pumped through a stationary inlet pipe into the center of the rotating bowl, below the disc stack.

Feed enters the bowl center
02

Distribution through disc channels

Feed flows outward through the narrow gaps between the stacked conical discs. The disc stack divides the flow into thin layers, each acting as a separate settling surface.

Distribution through disc channels
03

Separation under centrifugal force

Under 4,000–14,000 G, denser solids settle on the underside of the discs and slide outward to the bowl wall. Lighter liquid phases move inward toward the center.

Separation under centrifugal force
04

Discharge of separated phases

Clarified liquid exits through the bowl’s top outlet or centripetal pump. Solids are discharged manually, via intermittent self-cleaning ejection, or continuously through nozzles, depending on the configuration.

Discharge of separated phases

KEY FEATURES

  • High separation efficiency for fine particles
  • Compact bowl with large effective settling area
  • Continuous or self-cleaning operation
  • Two-phase and three-phase capability
  • Corrosion-resistant wetted materials
  • Explosion-proof options available
Disc Stack Centrifuge key features
Wear Protection

Protection for abrasive solids and corrosive media

Disc stack centrifuges handle fine particles and chemically aggressive media. Wetted materials and wear components are selected to resist corrosion and erosion, extending service intervals.

Corrosion-resistant bowl and disc materials

Corrosion-resistant bowl and disc materials

Bowl and disc stack available in SS304, SS316L, or duplex 2205 stainless steel. Selection depends on pH, chloride content, and temperature of the process fluid. PTFE/graphite seals for product-wetted connections.

Abrasion-resistant discharge components

Abrasion-resistant discharge components

Solids discharge ports and nozzles (in nozzle-type machines) are exposed to concentrated abrasive solids. Replaceable wear bushings or hardened inserts protect these high-wear zones. Strainers or pre-filters are recommended upstream to retain coarse impurities that could clog nozzles or cause imbalance.

Explosion-proof and gas-tight options

Explosion-proof and gas-tight options

For hazardous or flammable process fluids, explosion-proof motors and gas-tight bowl designs are available. Nitrogen blanketing can be specified to inert the bowl atmosphere.

Surface finish and cleaning

Surface finish and cleaning

Internal surfaces polished for sanitary applications. CIP (Cleaning in Place) systems are available for automated cleaning of product contact surfaces without manual disassembly.

Manufacturing capability

Built around real centrifuge manufacturing and assembly

Product performance depends on machining accuracy, rotating part quality, welding, assembly, control integration and final testing. Manufacturing capability therefore focuses on the core processes that directly influence centrifuge stability, service life and operating reliability.

Rotating assemblies
Precision machining and dynamic balancing of the bowl and disc stack. Bowl components undergo dynamic balance verification to ensure smooth operation, low vibration, and low noise at high speeds.
Control integration
PLC-based automatic control with inverter-driven main motor. Self-cleaning discharge sequences and monitoring of speed, vibration, and temperature are integrated into the control cabinet.
Wear protection
Wetted parts in corrosion-resistant stainless steel. Wear-resistant materials specified for abrasive solids (see Wear Protection module).
Qualification support
Manufactured to DIN EN ISO 9001 and CE requirements where applicable. Factory and enterprise qualification materials available.
FAQ

Frequently asked questions

Q1:   What is a disc stack centrifuge used for?

It is used for clarification and purification of liquids containing fine suspended solids, and for separation of immiscible liquid mixtures. Typical applications include edible oil clarification, yeast recovery, pharmaceutical purification, and fuel oil cleaning.

Q2:  What particle size can it handle?

Disc stack centrifuges are effective for particles in the range of approximately 3–30 μm. Separation efficiency depends on density difference, viscosity, and residence time. For very fine or near-neutral-density particles, pilot testing is recommended.

Q3:  What is the difference between disc stack and decanter centrifuges?

Disc stack centrifuges are high-speed, vertical machines optimized for fine clarification of low-solids feeds. Decanter centrifuges are horizontal, lower-speed machines designed for high-solids dewatering and continuous solids conveyance. Disc stacks achieve higher G-forces but cannot handle the solids loads that decanters can.

Q4: What discharge options are available?

Three main types: manual discharge (bowl opened for cleaning), self-cleaning (intermittent solids ejection at full speed), and nozzle discharge (continuous solids removal through nozzles at the bowl periphery).

Q5:  What materials are available for wetted parts?

SS304, SS316L, and duplex 2205 stainless steel are standard options. PTFE/graphite seals for product contact. Selection depends on the corrosiveness of the process fluid.

Q6: Can it handle three-phase separation?

Yes. Disc stack centrifuges can be configured for solid-liquid-liquid separation. The interface between the two liquid phases is adjusted via gravity disc diameter and bowl speed.

Send inquiry

Get a model recommendation for your material

Instead of asking only for a machine price, send the basic process data. It helps engineering select a suitable bowl size, motor power, wear protection and control configuration.

1. Material / slurry name and industry
2. Required processing capacity
3. Solids content and particle size
4. Target: clarified liquid, dry solids, or phase separation

Your inquiry should be reviewed by a technical sales or engineering team before quotation.

Send Inquiry
Overview Get a Quote