Home/Products/Manual Dsicharge Centrifuge/PQSB/PQFB Platform Base Top Discharge Centrifuges

PQSB/PQFB Series Platform Base Manual Discharge Centrifuge

A vertical batch filter centrifuge designed for high hygiene standards and complex working conditions. Full-turnover stainless steel cover with polished contact surfaces ensures thorough cleaning; suitable for granular and fibrous materials with low crystal breakage.

  • Full-turnover cover, no sanitary dead angles
  • Platform base, low center of gravity, compact footprint
  • Optional CIP system in line with GMP standards
  • Optional nitrogen protection for explosion-proof operation

For model selection, send your material, capacity, solids content and target separation result.

Basket diameter range600-1250mm
Max rotating speed1000-1500 r/min
Centrifuge force645-755
Main motor power3-18.5kW
Product overview

Hygienic batch separation in a compact platform design

PQSB/PQFB platform base top discharge centrifuges are batch filter centrifuges with wide applicability, low crystal breakage, suitable for granular suspensions and fibrous materials. The material enters the fast-spinning basket and is filtered by the filter liner under centrifugal force; liquid flows out through the liquid outlet while solids deposit on the internal wall of the basket. Once the solid cake reaches the rated capacity, feeding stops; the cake is washed and the washing water drained. After dewatering meets the requirement, the machine stops and the cake is discharged manually for the next batch.

  • Full-turnover cover with stainless steel construction, easily cleaned between case and basket.
  • Platform base lowers the center of gravity and requires minimum installation space.
  • Liquid-damping vibration isolators simplify routine maintenance.
  • Wide application range with no damage to particle shape.
PQSB/PQFB Series Platform Base Manual Discharge Centrifuge overview
Applications

Application scenarios

PQSB/PQFB centrifuges are applicable to solid-liquid separation in chemical, pharmaceutical, food, environmental protection, new energy and salt industries. Suitable for granular and fibrous materials; applicable to hazardous atmospheres with nitrogen protection. Suitable for suspensions with particle size 0.02–5 mm and solid content above 10% (maximum 50%).

Pharmaceutical and fine chemical separation
01

Pharmaceutical and fine chemical separation

Suitable for antibiotic, vitamin, herbicide, insect repellent and pharmaceutical intermediate separation; CIP system and stainless steel construction meet GMP requirements.

Salt and mineral processing
02

Salt and mineral processing

Commonly used for gypsum, ammonium sulphate, mirabilite, ferric sulphate, copper sulphate, nickel sulphate, potassium chloride, borax and soda processing.

Food and new energy materials
03

Food and new energy materials

Suitable for starch, sugar, vitamin and food additive separation, with low crystal breakage and hygienic design.

Core features

Designed for stable operation and long service life

01

Full-turnover cover design

Full-turnover cover with polished surface; case, fixing parts and basket made of stainless steel. Allows thorough cleaning between shell and basket.

02

Platform base with low center of gravity

Platform base lowers the center of gravity and requires minimum installation space. The platform can serve as an operation platform.

03

Liquid-damping vibration isolators

Liquid-damping vibration isolators simplify routine maintenance and reduce vibration interference to foundation and surrounding equipment.

04

Inverter start-up

Inverter start-up with smooth starting and adjustable separation factor.

05

Optional CIP system in line with GMP

Optional CIP system cleans the case, basket and liquid slot to meet GMP standards. Hinged cover is fitted with feeding pipe, washing pipe, sight glass and lighting hole.

06

Optional nitrogen protection and multiple cover forms

Sealed structure with silicone or fluoro-rubber seals; optional nitrogen protection for explosion-proof operation. Manual and hydraulic cover forms available.

Working principle

How separation works, step by step

01

Feed enters the basket

Material enters the fast-spinning basket through the feeding pipe.

Feed enters the basket
02

Filtration under centrifugal force

Material is filtered by the filter liner under centrifugal force; liquid flows out through the liquid outlet while solids deposit on the internal wall of the basket.

Filtration under centrifugal force
03

Washing and dewatering

Once the solid cake reaches the rated capacity, feeding stops; the cake is washed and the washing water drained.

Washing and dewatering
04

Manual discharge

After dewatering meets the requirement, the machine stops and the cake is discharged manually for the next batch.

Manual discharge

KEY FEATURES

  • Wide application range
  • Low crystal breakage
  • Full-turnover cover for thorough cleaning
  • CIP system meets GMP standards
  • Optional nitrogen protection for hazardous environments
  • Platform base for stable running with small footprint
PQSB/PQFB Series Platform Base Manual Discharge Centrifuge key features
Technical parameters

Technical parameters

PQSB
Items PQSB600 PQSB800 PQSB1000 PQSB1250
Basket Dia(mm) 600 800 1000 1250
Basket volume(L) 45 100 150 310
Max load(kg) 60 125 200 380
Max rolating speed(r/min) 1500 1200 1100 1000
Centrifuge force 755 645 680 70
Motor(kw) 3 7.5 11 18.5
Dimension (L*W*H)(mm) 1900*1300*1300 2200*1450*1350 2450*1500*1400 2450*1700*1650
Weight (kg) 1100 1500 2200 3200


PQFB
Items PQFB600 PQFB800 PQFB1000 PQFB1250
Basket Dia(mm) 600 800 1000 1250
Basket volume(L) 45 100 150 210
Max load(kg) 60 125 200 260
Max rolating speed(r/min) 1500 1200 1100 1000
Centrifuge force 755 645 680 700
Motor(kw) 3 7.5 11 18.5
Dimension (L*W*H)(mm) 1900*1300*1300 2400*1300*1650 2450*1500*1650 3000*1650*1550
Weight (kg) 1100 2000 2600 3500
Wear Protection

Protection for abrasive solids, corrosive media and hygienic operation

Key wear and contamination areas can be protected or cleaned to extend service intervals, simplify maintenance and meet GMP cleanliness requirements.

Basket & filter liner assembly

Basket & filter liner assembly

Rotating basket and material-contacting parts are made of stainless steel (304, 316L, titanium or Hastelloy optional) with smooth transition and polished surface to eliminate sanitary dead angles and reduce wear. Filter cloth serves as the filtration medium with sufficient strength and wear resistance.

Corrosion-resistant wetted parts

Corrosion-resistant wetted parts

Material-contacting parts available in 304 stainless steel, 321 stainless steel, 316L stainless steel, TA2 titanium, or lined with PFA/PTFE/Halar coating for aggressive acidic media. Surface finish Ra ≤ 0.38 μm available for pharmaceutical applications.

CIP & hygienic design

CIP & hygienic design

Optional CIP system cleans the case inner wall, basket inner/outer surfaces and liquid collecting tank, in line with GMP standards. Full-turnover cover allows flip angle of over 90° for easy access to basket interior.

Vibration isolator protection

Vibration isolator protection

Four-point liquid-damping vibration isolators protect the machine foundation from vibration. Routine maintenance includes monthly inspection of appearance and horizontal level, avoiding overloading and keeping the base clean from slurry and acid-alkali waste.

Manufacturing capability

Built around real centrifuge manufacturing and assembly

Product performance depends on machining accuracy, rotating part quality, welding, assembly, control integration and final testing. Manufacturing capability therefore focuses on the core processes that directly influence centrifuge stability, service life and operating reliability.

Rotating assemblies
Machining and assembly of basket and cover components; integrally welded base and case for high carrying strength.
Control integration
Inverter control with smooth starting and adjustable separation factor; PLC control and electric control cabinet available for process control.
Wear and corrosion protection
Stainless steel contact parts with polished surface; silicone or fluoro-rubber seals for demanding conditions; optional nitrogen protection system.
Qualification support
Factory and enterprise qualification materials available; CIP system in line with GMP standards.
Send inquiry

Get a model recommendation for your material

Instead of asking only for a machine price, send the basic process data. It helps engineering select a suitable bowl size, motor power, wear protection and control configuration.

1. Material / slurry name and industry
2. Required processing capacity
3. Solids content and particle size
4. Target: clarified liquid, dry solids, or phase separation

Your inquiry should be reviewed by a technical sales or engineering team before quotation.

Send Inquiry
Overview Get a Quote