Home/Products/Manual Dsicharge Centrifuge/PSB/PBZ Vertical Top Discharge Centrifuges

PSB/PBZ Series Vertical Top Discharge Centrifuge

A vertical batch filter centrifuge for solid-liquid separation of granular suspensions and fibrous materials. The PSB/PBZ Series offers low crystal breakage, wide application scope, and optional nitrogen protection for toxic and flammable/explosive environments.

  • Low crystal breakage, granular and fibrous materials
  • Optional CIP system in line with GMP standards
  • Sealed explosion-proof configuration available
  • PBZ direct-linked motor eliminates belt friction dust

For model selection, send your material, capacity, solids content and target separation result.

Basket diameter range300-1500mm
Max rotating speed850-2825 r/min
Centrifuge force560-1340
Main motor power1.5-30 kW
Product overview

Vertical batch filtration with low crystal breakage

PSB/PBZ vertical top discharge centrifuges are vertical batch filter centrifuges suitable for solid-liquid separation of granular suspensions and fibrous materials, with low risk of crystal breakage and wide application scope. The material enters the fast-spinning basket through the feeding pipe and is filtered by the filter liner under centrifugal force; liquid flows out through the liquid outlet while solids deposit on the basket wall. Once the cake reaches the rated capacity, feeding stops; the cake is washed and dewatered, then discharged manually after stopping.

  • Suitable for granular and fibrous materials with low crystal breakage.
  • Flat base lowers center of gravity and can serve as an operation platform.
  • Material-contacting parts in stainless steel with polished surface.
  • Optional nitrogen protection for toxic and flammable/explosive applications.
PSB/PBZ Series Vertical Top Discharge Centrifuge overview
Applications

Application scenarios

PSB/PBZ centrifuges are used for solid-liquid separation in chemical, pharmaceutical, food, environmental protection, new energy and salt industries. Suitable for granular and fibrous materials; can be applied to toxic and flammable/explosive environments with nitrogen protection.

Chemical and pharmaceutical separation
01

Chemical and pharmaceutical separation

Applicable to solid-liquid separation in chemical and pharmaceutical industries, with stainless steel contact parts and optional CIP system meeting GMP requirements.

Food and new energy processing
02

Food and new energy processing

Suitable for granular and fibrous materials with low crystal breakage, widely used in food processing and new energy material separation.

Salt industry and hazardous environments
03

Salt industry and hazardous environments

Applicable to salt industry separation; with nitrogen protection, can be applied to toxic and flammable/explosive environments.

Core features

Designed for stable operation and long service life

01

Flat base design

Flat base lowers the center of gravity, requires minimum space and can serve as an operation platform.

02

Stainless steel contact parts

Material-contacting parts are made of stainless steel with smooth transition and polished surface to eliminate sanitary dead angles.

03

Liquid-damping vibration isolators

Equipped with liquid-damping vibration isolators for good vibration reduction and simple maintenance.

04

Inverter start-up

Inverter start-up with smooth starting and adjustable separation factor.

05

Sealed structure with optional nitrogen protection

Sealed structure with silicone rubber or fluoro-rubber seals; optional nitrogen protection system for toxic and flammable/explosive applications.

06

Optional CIP system and PBZ direct-linked motor

Optional CIP system in line with GMP standards; PBZ adopts direct-linked explosion-proof motor to eliminate friction dust of belt drive, motor at the bottom saves floor space.

Working principle

How separation works, step by step

01

Feed enters the basket

Material enters the fast-spinning basket through the feeding pipe.

Feed enters the basket
02

Filtration under centrifugal force

The material is filtered by the filter liner under centrifugal force; liquid flows out through the liquid outlet while solids deposit on the basket wall.

Filtration under centrifugal force
03

Washing and dewatering

Once the cake reaches the rated capacity, feeding stops; the cake is washed and dewatered.

Washing and dewatering
04

Manual discharge

After stopping, the cake is discharged manually. Hinged cover opens for effective cleaning between shell and basket.

Manual discharge

KEY FEATURES

  • Low crystal breakage
  • Applicable to granular and fibrous materials
  • CIP system meets GMP cleanliness requirements
  • Sealed explosion-proof configuration available
  • PBZ direct-linked motor eliminates belt friction dust
  • Flat base for stable running and convenient operation
PSB/PBZ Series Vertical Top Discharge Centrifuge key features
Technical parameters

Technical parameters

PSB
Items PSB600 PSB800 PSB1000 PSB1200 PSB1250 PSB1500
Basket Dia(mm) 600 800 1000 1200 1250 1500
Basket volume(L) 45 120 200 330 400 600
Max load(kg) 60 150 250 410 500 800
Max rolating speed(r/min) 1500 1200/1500 1100/1200 1100/1200 1000/1200 850
Centrifuge force 755 645/1008 680/806 67/968 700/1008 607
Motor(kw) 3 7.5 11 18.5 18.5/22 30
Dimension (L*W*H)(mm) 1300*1050*1150 1700*1200*1300 2000*1400*1500 2550*1800*1750 2550*1800*1750 2600*2300*1800
Weight (kg) 1100 1500 2500 3800 3800 6000


PBZ
Items PBZ300 PBZ450 PBZ600 PBZ800 PBZ1000
Basket Dia(mm) 300 450 600 800 1000
Basket volume(L) 5 20 40 100 155
Max load(kg) 7 30 55 135 200
Max rolating speed(r/min) 2825 1900 1500 1200 1000
Centrifuge force 1340 910 755 645 560
Motor(kw) 11 1.5 3 5.5 7.5
Dimension (L*W*H)(mm) 600*600*850 850*850*1000 1200*1050*1300 1500*1250*1400 1600*1450*1450
Weight (kg) 200 300 1100 1500 2000
Wear Protection

Protection for abrasive solids, corrosive media and hygienic operation

Key wear and contamination areas can be protected or cleaned to extend service intervals, simplify maintenance and meet GMP cleanliness requirements.

Bowl & basket assembly

Bowl & basket assembly

Rotating basket and material-contacting parts are made of stainless steel with smooth transition and polished surface to eliminate sanitary dead angles and reduce wear.

Seals & nitrogen protection

Seals & nitrogen protection

Sealed structure with silicone rubber or fluoro-rubber seals; optional nitrogen protection system for toxic and flammable/explosive applications.

CIP & hygienic design

CIP & hygienic design

Optional CIP system cleans invisible internal parts including shell inner wall, basket inner/outer surfaces and liquid collecting tank, in line with GMP standards.

PBZ direct-linked motor

PBZ direct-linked motor

PBZ adopts a direct-linked explosion-proof motor to eliminate friction dust of belt drive; motor at the bottom saves floor space.

Manufacturing capability

Built around real centrifuge manufacturing and assembly

Product performance depends on machining accuracy, rotating part quality, welding, assembly, control integration and final testing. Manufacturing capability therefore focuses on the core processes that directly influence centrifuge stability, service life and operating reliability.

Rotating assemblies
Machining and assembly of basket and scraper components.
Control integration
Inverter start-up, electrical cabinet and drive configuration for process control.
Wear and corrosion protection
Stainless steel contact parts with polished surface; silicone or fluoro-rubber seals for demanding conditions.
Qualification support
Factory and enterprise qualification materials available; CIP system in line with GMP standards.
FAQ

Frequently asked questions

Q1: What is the difference between  PSB and PBZ ?

PBZ adopts a direct-linked explosion-proof motor to eliminate friction dust of belt drive; the motor is installed at the bottom of the machine, saving floor space.

Q2: What materials can be separated?

PSB/PBZ are suitable for solid-liquid separation of granular suspensions and fibrous materials, with low risk of crystal breakage.

Q3: What industries are these centrifuges used in?

Chemical, pharmaceutical, food, environmental protection, new energy and salt industries.

Q4: Can it be used in hazardous environments?

Yes. With sealed structure, silicone or fluoro-rubber seals and optional nitrogen protection system, it is suitable for toxic and flammable/explosive applications.

Q5: Does it meet GMP requirements?

Yes. Optional CIP system cleans invisible internal parts and is in line with GMP standards.

Q6: How is the cake discharged?

After the cake reaches rated capacity, feeding stops, the cake is washed and dewatered, then discharged manually after stopping. The hinged cover opens for effective cleaning between shell and basket.

Send inquiry

Get a model recommendation for your material

Instead of asking only for a machine price, send the basic process data. It helps engineering select a suitable bowl size, motor power, wear protection and control configuration.

1. Material / slurry name and industry
2. Required processing capacity
3. Solids content and particle size
4. Target: clarified liquid, dry solids, or phase separation

Your inquiry should be reviewed by a technical sales or engineering team before quotation.

Send Inquiry
Overview Get a Quote