Home/Products/Manual Dsicharge Centrifuge/PSD Platform Base Bag-lifting Top Discharge Centri

PSD Series Platform Base Bag-Lifting Centrifuge

A vertical batch filter centrifuge with bag-lifting discharge for solid-liquid separation of granular and fibrous materials. Low crystal breakage, simple operation, and optional hydraulic suspension crane for hygienic discharging.

  • Bag-lifting discharge, low crystal breakage
  • Flat platform base with low center of gravity
  • Optional CIP system in line with GMP standards
  • Sealed explosion-proof configuration available

For model selection, send your material, capacity, solids content and target separation result.

Basket diameter range800-1800mm
Max rotating speed780-1500 r/min
Centrifuge force607-1008
Main motor power7.5-37 kW
Product overview

Bag-lifting discharge in a compact platform design

PSD platform base bag-lifting top discharge centrifuge is a vertical batch filter centrifuge. The filter cloth with cake is lifted out as a whole for discharging, featuring low crystal breakage, low labour intensity and high efficiency. The material enters the fast-spinning basket and is filtered by the filter liner under centrifugal force; liquid flows out through the liquid outlet while solids deposit on the basket wall. Once the cake reaches the rated capacity, feeding stops and the cake is washed and dewatered. After stopping, a special lifting tool lifts the filter cloth with cake out to the discharging place; the cake is discharged and the cloth is put back for the next batch.

  • Bag-lifting discharge protects crystals and raises efficiency.
  • Flat platform base lowers center of gravity and serves as operation platform.
  • Four-point liquid-damping vibration isolators simplify maintenance.
  • Optional hydraulic suspension crane for hygienic discharging.
PSD Series Platform Base Bag-Lifting Centrifuge overview
Applications

Application scenarios

PSD centrifuges are applicable to solid-liquid separation in chemical, pharmaceutical, food, environmental protection, new energy and salt industries. Especially suitable for hygienic and frequent-batch-change applications; applicable to hazardous atmospheres with nitrogen protection.

Pharmaceutical and chemical separation
01

Pharmaceutical and chemical separation

Applicable to antibiotic, vitamin and pharmaceutical intermediate separation; stainless steel contact parts and CIP system meet GMP requirements.

Food and salt industry processing
02

Food and salt industry processing

Suitable for salt, monosodium glutamate, food additives, starch and sugar processing, with low crystal breakage and hygienic design.

Hazardous and explosion-proof environments
03

Hazardous and explosion-proof environments

Sealed structure with silicone/fluoro-rubber seals; optional nitrogen protection for toxic and flammable/explosive applications.

Core features

Designed for stable operation and long service life

01

Bag-lifting discharge

Bag-lifting discharge with low crystal breakage, low labour intensity and high efficiency; wide application scope.

02

Integrally welded frame

Base and case are integrally welded for high carrying strength and reliable operation.

03

Flat platform base

Flat platform base lowers the center of gravity and saves space; can serve as an operation platform.

04

Four-point liquid-damping vibration isolators

Four-point liquid-damping vibration isolators simplify maintenance and reduce vibration interference to foundation and surrounding equipment.

05

Hinged cover for thorough cleaning

Hinged cover allows thorough cleaning between shell and basket; optional CIP system meets GMP requirements.

06

Optional hydraulic suspension crane

Optional hydraulic suspension crane for convenient, hygienic discharging; inverter control with smooth starting and adjustable separation factor.

Working principle

How separation works, step by step

01

Feed enters the basket

Material enters the fast-spinning basket through the feeding pipe.

Feed enters the basket
02

Filtration under centrifugal force

The material is filtered by the filter liner under centrifugal force; liquid flows out through the liquid outlet while solids deposit on the basket wall.

Filtration under centrifugal force
03

Washing and dewatering

Once the cake reaches the rated capacity, feeding stops; the cake is washed and dewatered.

Washing and dewatering
04

Bag-lifting discharge

After stopping, a special lifting tool lifts the filter cloth with cake out to the discharging place; cake is discharged and cloth is put back for the next batch.

Bag-lifting discharge

KEY FEATURES

  • Low crystal breakage
  • Applicable to granular and fibrous materials
  • Bag-lifting discharge for low labour intensity
  • CIP system meets GMP cleanliness requirements
  • Sealed explosion-proof configuration available
  • Flat base for stable running and convenient operation
PSD Series Platform Base Bag-Lifting Centrifuge key features
Technical parameters

Technical parameters

Items PSD600 PSD1000 PSD1200 PSD1250 PSD1500 PSD1600 PSD1800
Basket Dia(mm) 800 1000 1200 1250 1500 1600 1800
Basket volume(L) 120 200 330 400 600 800 910
Max load(kg) 150 250 410 500 800 1000 1100
Max rolating speed(r/min) 1200/1500 1100/1200 960/1050 1000/1200 850 850 780
Centrifuge force 645/1006 680/806 670/740 700/1008 607 647 612
Motor(kw) 7.5 11 18.5 18.5/22 30 37 37
Dimension (L*W*H)(mm) 1750*1200*1300 2000*1400*1500 2550*1800*1750 2550*1800*1750 2600*2300*1800 3200*2400*2150 3300*2600*2100
Weight (kg) 1500 2500 3800 4000 6000 8500 10000
Wear Protection

Protection for abrasive solids, corrosive media and hygienic operation

Key wear and contamination areas can be protected or cleaned to extend service intervals, simplify maintenance and meet GMP cleanliness requirements.

Bowl & basket assembly

Bowl & basket assembly

Rotating basket and material-contacting parts are made of stainless steel with smooth transition and polished surface to eliminate sanitary dead angles and reduce wear.

Seals & nitrogen protection

Seals & nitrogen protection

Sealed structure with silicone rubber or fluoro-rubber seals; optional nitrogen protection system for toxic and flammable/explosive applications.

CIP & hygienic design

CIP & hygienic design

Optional CIP system cleans invisible internal parts including shell inner wall, basket inner/outer surfaces and liquid collecting tank, in line with GMP standards.

Hydraulic suspension crane

Hydraulic suspension crane

Optional hydraulic suspension crane for convenient discharging; all external parts and fasteners in stainless steel.

Manufacturing capability

Built around real centrifuge manufacturing and assembly

Product performance depends on machining accuracy, rotating part quality, welding, assembly, control integration and final testing. Manufacturing capability therefore focuses on the core processes that directly influence centrifuge stability, service life and operating reliability.

Rotating assemblies
Machining and assembly of basket and hinged cover components; integrally welded base and case for high carrying strength.
Control integration
Inverter control with smooth starting and adjustable separation factor; energy-consumption braking system for reliable operation.
Wear and corrosion protection
Stainless steel contact parts with polished surface; silicone or fluoro-rubber seals for demanding conditions; optional nitrogen protection system.
Qualification support
Factory and enterprise qualification materials available; CIP system in line with GMP standards.
FAQ

Frequently asked questions

Q1: What is the PSD centrifuge?

PSD is a vertical batch filter centrifuge with a flat platform base and bag-lifting discharge. The filter cloth with cake is lifted out as a whole for discharging, featuring low crystal breakage, low labour intensity and high efficiency.

Q2: How does the bag-lifting discharge work?

After the cake reaches the rated capacity and is washed and dewatered, the machine stops. A special lifting tool lifts the filter cloth together with the cake out to the discharging place. The cake is discharged and the cloth is put back for the next batch.

Q3: What materials can be separated?

PSD centrifuges are suitable for solid-liquid separation of granular and fibrous materials. They are especially suitable for hygienic and frequent-batch-change applications.

Q4: What industries are these centrifuges used in?

Chemical, pharmaceutical, food, environmental protection, new energy and salt industries.

Q5: Does it meet GMP requirements?

Yes. The hinged cover allows thorough cleaning between shell and basket. An optional CIP system cleans invisible internal parts including shell inner wall, basket inner/outer surfaces and liquid collecting tank, in line with GMP standards.

Q6: Can it be used in hazardous environments?

Yes. With sealed structure, silicone or fluoro-rubber seals and optional nitrogen protection system, PSD centrifuges can be applied to toxic and flammable/explosive environments.

Send inquiry

Get a model recommendation for your material

Instead of asking only for a machine price, send the basic process data. It helps engineering select a suitable bowl size, motor power, wear protection and control configuration.

1. Material / slurry name and industry
2. Required processing capacity
3. Solids content and particle size
4. Target: clarified liquid, dry solids, or phase separation

Your inquiry should be reviewed by a technical sales or engineering team before quotation.

Send Inquiry
Overview Get a Quote