Home/Products/Peeler centrifuge/PAUT Top-suspended Bottom Discharge Scraper Centri

PAUT Series Top-Suspended Scraper Discharge Centrifuge

A top-suspended automatic centrifuge with upper-type direct drive for continuous solid-liquid separation. The rotating centers of drive and basket coincide with the machine center for stable operation. Large L/D ratio offers high loading capacity, fully-automatic PLC program control ensures reliable and safe operation.

  • Upper-type direct drive, no belt, no friction dust
  • Large L/D ratio for big loading capacity
  • Independent bearing seat for high carrying capacity
  • Foundation-free installation with liquid-damping absorber

For model selection, send your material, capacity, solids content and target separation result.

Basket diameter range1250-1600mm
Max rotating speed850-970 r/min
Centrifuge force598-658
Main motor power22-45kW
Product overview

Stable separation in a compact top-suspended design

PAUT top-suspended scraper discharge automatic centrifuge adopts upper-type direct drive with coincident rotating centers for stable running; rigidly jointed base and case form a simple and compact full-load-bearing structure. Direct drive eliminates belt friction dust; large L/D ratio offers big loading capacity; independent bearing seat provides strong support; liquid-damping absorber allows foundation-free installation; fully-automatic control ensures reliable and safe operation; optional nitrogen protection supports explosion-proof applications. The material enters the fast-spinning basket and is filtered under centrifugal force; the cake is washed and dewatered, then discharged by hydraulic scraper automatically.

  • Upper-type direct drive eliminates belt friction dust for clean and explosion-proof applications.
  • Coincident rotating centers ensure smooth, low-vibration operation.
  • Large L/D ratio offers high loading capacity per machine.
  • Independent bearing seat with strong carrying capacity and foundation-free installation.
PAUT Series Top-Suspended Scraper Discharge Centrifuge overview
Applications

Application scenarios

PAUT centrifuges are applicable to solid-liquid separation in chemical, pharmaceutical, food, environmental protection, new energy and salt industries. Suitable for washing and separation of suspension media containing solid particles and crystalline solid phases. Applicable to hazardous atmospheres with nitrogen protection.

Chemical and pharmaceutical separation
01

Chemical and pharmaceutical separation

Commonly used for gypsum, ammonium sulphate, mirabilite, ferric sulphate, copper sulphate, nickel sulphate, potassium chloride, borax, soda, rubber additives, dye, starch, sugar, vitamin, antibiotic, herbicide and insect repellent processing.

Metal refining and sludge treatment
02

Metal refining and sludge treatment

Suitable for copper, zinc, aluminum, pickling gypsum, metal refining, water purification sludge, sewage sludge and various other chemical products.

Hazardous and explosion-proof environments
03

Hazardous and explosion-proof environments

Sealed structure with silicone or fluoro-rubber seals; optional nitrogen protection for toxic and flammable/explosive applications. PLC control with HMI for automatic operation.

Core features

Designed for stable operation and long service life

01

Upper-type direct drive

Upper-type direct drive; rotating centers of drive and basket coincide with machine center for stable operation. No belt drive, no friction dust.

02

Large L/D ratio with independent bearing seat

Large length-diameter ratio offers big loading capacity. Independent bearing seat with large support span and low basket gravity center for higher carrying capacity.

03

Rigidly jointed base and case

Rigidly jointed base and case form a simple and compact full-load-bearing structure.

04

Liquid-damping vibration absorber

Liquid-damping vibration absorber; no foundation required, simplifying installation and maintenance.

05

Fully-automatic program control

Fully-automatic PLC program control with HMI; feeding, initial filtration, washing, fine filtration and discharging are all monitored automatically.

06

Optional nitrogen protection for explosion-proof

Optional nitrogen protection device for explosion-proof applications. Safety protections include explosion-proof, vibration protection, full-material detection, temperature protection, interlocking, speed monitoring, overload protection and nitrogen protection system.

Working principle

How separation works, step by step

01

Feed enters the basket

Material enters the fast-spinning basket through single or multi-tube side feeding.

Feed enters the basket
02

Filtration under centrifugal force

Material is filtered under centrifugal force; liquid flows out while solids deposit on the basket wall. Feeding, initial filtration and fine filtration are monitored automatically.

Filtration under centrifugal force
03

Washing and dewatering

The cake is washed and dewatered. Process speeds are settable per requirements.

Washing and dewatering
04

Scraper discharge

Hydraulic scraper discharges the cake radially and axially. Residual cake treatment with gas back-blowing, roller-assisted or gas-assisted scraper ensures filter cloth regeneration.

Scraper discharge

KEY FEATURES

  • Direct drive without belt eliminates friction dust
  • Coincident rotating centers ensure smooth operation
  • Large L/D ratio offers high loading capacity
  • Independent bearing seat with strong carrying capacity
  • Foundation-free installation reduces cost
  • Fully-automatic control for reliable operation
PAUT Series Top-Suspended Scraper Discharge Centrifuge key features
Technical parameters

Technical parameters

Items PAUT1250A PAUT1250B PAUT1320 PAUT1500 PAUT1600
Basket Dia(mm) 1250 1250 1320 1500 1600
Basket volume(L) 281 450 490 653 970
Max load(kg) 380 610 660 880 1300
Max rolating speed(r/min) 970 970 900 850 850
Centrifuge force 658 658 598 607 647
Motor(kw) 22 30 30 37 45
Dimension (L*W*H)(mm) 2100*2000*2200 2100*2000*2600 2100*2000*2600 2600*2350*2700 2700*2350*2900
Weight (kg) 4500 5000 5500 8500 10000
Wear Protection

Protection for abrasive solids, corrosive media and hygienic operation

Key wear and contamination areas can be protected or cleaned to extend service intervals, simplify maintenance and meet GMP cleanliness requirements.

Basket & contact parts

Basket & contact parts

Coating options include HALAR (F30), F40, F46, PFA lining, PE lining and rubber lining for aggressive acidic or alkaline media. The lower bearing end cover adopts double sealing to protect the main shaft from corrosion, avoiding direct contact with mist and gas.

Coating & lining protection

Coating & lining protection

Material-contacting parts available in 304 stainless steel, 321 stainless steel, 316L stainless steel, TA2 titanium, or lined with PFA/PTFE/Halar coating for aggressive acidic media. Surface finish Ra ≤ 0.38 μm available for pharmaceutical applications.

Residual cake treatment

Residual cake treatment

Gas back-blowing, roller-assisted scraper and gas-assisted scraper effectively eliminate the residual cake layer for filter cloth regeneration, improving filtration efficiency and reducing cross-contamination between batches.

Vibration isolator protection

Vibration isolator protection

Four-point liquid-damping vibration isolators protect the machine foundation from vibration. Routine maintenance includes monthly inspection of appearance and horizontal level, avoiding overloading and keeping the base clean from slurry and acid-alkali waste.

Manufacturing capability

Built around real centrifuge manufacturing and assembly

Product performance depends on machining accuracy, rotating part quality, welding, assembly, control integration and final testing. Manufacturing capability therefore focuses on the core processes that directly influence centrifuge stability, service life and operating reliability.

Rotating assemblies
Machining and assembly of basket and top-suspended drive components; rigidly jointed base and case for high carrying strength. Independent bearing seat with large support span.
Control integration
PLC programmable control and DCS control available; electrical components from brand suppliers; explosion-proof, vibration protection, temperature protection, interlocking, speed monitoring and overload protection integrated.
Wear and corrosion protection
Material-contacting parts available in 304, 316L, 321, 904L stainless steel, duplex steel or titanium (TA). Surface treatment includes mirror polishing, matte finishing and passivation. Coating options include HALAR (F30/F40/F46), PFA, PE lining and rubber lining.
Qualification support
Factory and enterprise qualification materials available; design complies with GMP requirements for pharmaceutical applications.
FAQ

Frequently asked questions

Q1: What is the PAUT centrifuge?

PAUT is a top-suspended scraper discharge automatic centrifuge with upper-type direct drive. The rotating centers of drive and basket coincide with the machine center for stable operation. It is suitable for solid-liquid separation of suspension media containing solid particles and crystalline solid phases.

Q2: What is the advantage of upper-type direct drive?

Upper-type direct drive eliminates belt transmission, which means no friction dust. The rotating centers of drive and basket coincide with the machine center, ensuring smooth and low-vibration operation. This is especially important for clean and explosion-proof applications.

Q3: What safety protections are included?

Standard protections include explosion-proof, vibration protection, full-material detection, temperature protection, mechanical-electrical interlocking, speed monitoring and overload protection. Optional nitrogen protection system with automatic nitrogen supply, liquid seal, gas-liquid separator and oxygen content detection is available for explosion-proof applications.

Q4: What industries and materials can be processed?

PAUT centrifuges are widely used in chemical, pharmaceutical, food, environmental protection, new energy and salt industries. Commonly used for gypsum, ammonium sulphate, mirabilite, ferric sulphate, copper sulphate, nickel sulphate, potassium chloride, borax, soda, rubber additives, dye, starch, sugar, vitamin, antibiotic, herbicide, insect repellent, copper, zinc, aluminum, pickling gypsum, metal refining, water purification sludge and sewage sludge processing.

Q5: What discharge and residual cake options are available?

Hydraulic scraper discharge is standard. Residual cake treatment options include gas back-blowing, roller-assisted scraper and gas-assisted scraper, which effectively eliminate the residual cake layer for filter cloth regeneration.

Q6: Does it meet GMP requirements?

Yes. Surface treatment options include mirror polishing, matte finishing and passivation. Coating options include HALAR, PFA, PE and rubber lining. The design complies with GMP requirements for pharmaceutical applications.

Send inquiry

Get a model recommendation for your material

Instead of asking only for a machine price, send the basic process data. It helps engineering select a suitable bowl size, motor power, wear protection and control configuration.

1. Material / slurry name and industry
2. Required processing capacity
3. Solids content and particle size
4. Target: clarified liquid, dry solids, or phase separation

Your inquiry should be reviewed by a technical sales or engineering team before quotation.

Send Inquiry
Overview Get a Quote