AXI CENTRIFUGE
AXI CENTRIFUGE How to Select an Industrial Decanter Centrifuge for Sludge Dewatering A Practical Guide to Capacity, Separation Performance and Equipment Selection Introduction Industrial sludge dewatering is an essential

AXI CENTRIFUGE
How to Select an Industrial Decanter Centrifuge for Sludge Dewatering
A Practical Guide to Capacity, Separation Performance and Equipment Selection
Introduction
Industrial sludge dewatering is an essential process in municipal wastewater treatment, mining, chemical manufacturing, and many other industries. Choosing the right industrial decanter centrifuge can help reduce sludge volume, improve solid-liquid separation efficiency, and lower operating and disposal costs.
However, selecting a suitable machine requires more than comparing equipment dimensions or motor power. Feed characteristics, dry solids loading, required cake dryness, centrate quality, and operating conditions must all be considered.
This guide explains the key factors to consider when selecting a decanter centrifuge for sludge dewatering.
1. What Is an Industrial Decanter Centrifuge?
An industrial decanter centrifuge is a continuous solid-liquid separation machine that uses centrifugal force to separate suspended solids from liquid.
Inside the rotating bowl, solid particles settle against the bowl wall. An internal screw conveyor rotates at a slightly different speed and continuously transports the separated solids toward the discharge outlet. The clarified liquid exits through a separate outlet.
Unlike batch-operated filtration equipment, a decanter centrifuge can operate continuously, making it suitable for large-volume industrial processes.
![]() |
AXI industrial decanter centrifuge for continuous solid-liquid separation.
Explore the AXI industrial centrifuge solutions for more information about available separation equipment.
2. Understand Your Sludge Characteristics
Before selecting a centrifuge model, it is important to understand the physical and chemical properties of the feed material.
Feed flow rate (m³/h)
Feed solids concentration (wt%)
Particle size distribution
Solid and liquid density
Sludge viscosity
Operating temperature
pH value
Abrasiveness and corrosiveness
Different sludge types can behave very differently during centrifugal separation. Fine particles, sticky materials, high-viscosity sludge, and abrasive mineral suspensions may require different bowl designs, operating parameters, and wear-protection configurations.
![]() |
Sludge characteristics and feed material testing are important for centrifuge selection.
3. Calculate the Required Processing Capacity
One of the most important factors in centrifuge selection is the actual solids loading. It is necessary to distinguish between feed flow rate and dry solids loading.
Dry Solids Loading (kg/h) = Feed Flow (m³/h) × Feed Density (kg/m³) × Solids Mass Fraction
For example:
Feed flow: 20 m³/h
Feed density: 1,000 kg/m³
Feed solids concentration: 3 wt%
Estimated dry solids loading: 20 × 1,000 × 3% = 600 kg/h
This means the centrifuge needs to handle approximately 600 kg of dry solids per hour, in addition to the liquid phase.
The final machine capacity should be determined according to actual process conditions and testing results. A machine should not be selected based on feed volume alone.
4. Define the Required Cake Dryness and Centrate Quality
Cake dryness. Cake dryness refers to the percentage of dry solids remaining in the discharged sludge cake. Higher cake dryness generally means less water remains in the solids, potentially reducing transportation and disposal costs.
Centrate clarity. Centrate is the liquid discharged from the centrifuge. Its suspended solids content is an important indicator of separation performance.
In practical operation, cake dryness and centrate clarity may influence each other. The optimum operating point depends on sludge properties, polymer dosage, bowl speed, differential speed, and liquid pool depth. The target values should therefore be agreed upon before final equipment selection.
![]() |
Actual sludge dewatering results should be evaluated by comparing feed material, discharged cake, and centrate.
5. Understand the Working Principle of a Decanter Centrifuge
Feed introduction: Sludge enters the rotating bowl through the feed pipe and distribution chamber.
Centrifugal separation: High-speed rotation generates centrifugal force, causing denser solid particles to settle against the bowl wall.
Solid conveying: The screw conveyor rotates at a differential speed relative to the bowl, transporting settled solids toward the conical discharge section.
Liquid discharge: The separated liquid flows toward the liquid discharge end and exits through the liquid outlets.
![]() |
Working principle of a horizontal screw decanter centrifuge.
The main operating parameters include bowl speed, differential speed, and liquid pool depth. These parameters can be adjusted according to the characteristics of the material and the required separation results.
6. Key Technical Parameters for Centrifuge Selection
Bowl Diameter and Length
The bowl diameter and length influence the available separation area, sedimentation space, and solids conveying capacity. Larger equipment may provide greater processing potential, but the actual capacity depends on the material and operating conditions.
Rotational Speed and G-Force
The centrifugal force is commonly expressed as relative centrifugal force (RCF). A simplified calculation is:
RCF = 1.118 × 10⁻⁵ × r × N²
Where r is the rotating radius in centimetres and N is rotational speed in rpm. A higher centrifugal force can improve particle sedimentation, but the optimum speed must also consider mechanical design limits, material characteristics, and energy consumption.
Differential Speed
Differential speed is the speed difference between the rotating bowl and screw conveyor. It affects solids residence time, conveying capacity, and cake dryness. The appropriate setting depends on the sludge characteristics and required operating performance.
Construction Materials and Wear Protection
Material selection is particularly important when handling corrosive or abrasive sludge. Common options include:
Stainless steel 304
Stainless steel 316L
Duplex stainless steel 2205
Special corrosion-resistant alloys, where required
Tungsten carbide wear protection for selected high-wear areas
The final material configuration should be based on chemical composition, chloride concentration, temperature, and abrasion conditions.
![]() |
Bowl, screw conveyor, and wear-protection components are important considerations in decanter centrifuge design.
7. How to Choose the Right Decanter Centrifuge Model
Selecting a model requires matching the equipment configuration to the actual process requirements. AXI provides industrial centrifuge solutions across different equipment sizes and configurations. The selection process considers feed flow, dry solids loading, separation requirements, installation conditions, and maintenance expectations.
| Selection factor | Information required |
| Feed capacity | Required flow rate in m³/h |
| Solids loading | Dry solids in kg/h |
| Material properties | Particle size, density, viscosity |
| Cake requirement | Target cake dryness |
| Liquid requirement | Target centrate quality |
| Chemical conditions | pH, temperature, corrosion |
| Wear conditions | Abrasiveness and wear protection |
| Installation | Available space and utilities |
A larger centrifuge is not always the best solution. Correct process evaluation is more important than simply selecting the largest available model.
Explore the AXI decanter centrifuge range and contact our technical team for model recommendations.
8. Applications of Industrial Decanter Centrifuges
Wastewater Treatment
Used for municipal and industrial sludge thickening and dewatering, helping reduce sludge volume and disposal requirements.
Mining and Mineral Processing
Suitable for processing mineral slurries, tailings, and industrial wastewater containing suspended mineral particles.
Chemical Processing
Used for separating chemical precipitates, process residues, and various industrial suspensions. Material compatibility must be evaluated for each application.
Oilfield and Drilling Mud Treatment
Used for separating fine solids from drilling fluids and treating drilling waste, depending on the process configuration and required separation performance.
![]() |
Suggested caption: Industrial decanter centrifuges can be configured for different sludge and slurry separation applications.
9. Information Required Before Requesting a Quotation
To recommend a suitable centrifuge, customers should prepare as much of the following information as possible:
Material name and source
Feed flow rate
Feed solids concentration
Particle size distribution
Operating temperature and pH
Required cake dryness
Required centrate quality
Daily operating hours
Corrosion or abrasion concerns
Installation and electrical requirements
Providing accurate process information helps engineers evaluate the equipment configuration and avoid selecting an unsuitable model.
10. Work with AXI for Your Sludge Dewatering Project
Selecting an industrial decanter centrifuge is a process engineering decision, not simply a model comparison.
AXI focuses on industrial solid-liquid separation solutions, providing equipment selection support based on feed characteristics, processing capacity, separation targets, and operating conditions.
Whether your project involves wastewater treatment, mining sludge, chemical processing, or drilling mud treatment, our team can help evaluate the application and recommend a suitable centrifuge configuration.
Contact AXI for Your Decanter Centrifuge Solution
Website: axicentrifuge.com
Email: jason@wandergroup.cn
WhatsApp: +86 18862645020
Send us your material information and process requirements to receive a preliminary equipment recommendation.




